V Seals are simple, versatile, elastomeric face type seals produced in nitrile that can be the primary sealing element in an application, a contaminant excluder or a back up seal. These seals are mounted on shafts and their thin, tapered lip seals against a surface or counterface at right angles to the shaft.
No special demands are placed on the surface finish of the shaft seating and these seals act as flingers, since they have an interference fit on the shaft and rotate with it.
Improper alignment of the shaft with respect to the counterface can be tolerated and V seals also provide reliable sealing if the shaft is out of round or rotates eccentrically. It should be remembered when using these seals that the amount by which the shaft can be displaced axially is governed by the permissible displacement of the V seal relative to its counterface.
These seals are made entirely of elastomer without fabric or sheet metal reinforcement. They are, therefore, particularly easy to install. Depending on size, they can be stretched and can be pushed over other components of the arrangement, like flanges, pulleys or even housings. This is a very valuable characteristic of these seals, especially in the case of repairs.
An ideal seal used for preventing contamination from dirt, water, or oil splash, V Seals also act as a superb grease retainer. Easily installed by hand and held in place by its own tension, they can be used as a primary or secondary seal for an oil seal, mechanical seal or labyrinth.
Owing to their unique features, V seals are widely used in a lot of industries, such as machine tool, boat, automobile, metallurgical machinery, chemical machinery, engineering machinery, building machinery, plastics, agriculture and different instruments. There are no fields of industry where V seals are not used. From an individual seal for repairs or maintenance to a quality assured application in aerospace, automotive or general engineering. These seals are used widely in many industrial and commercial areas.
Darcoid Nor Cal Seal provides adhesives and seals which are highly cost effective, have high production rate sourcing to the highest technologies of perfluoronated elastomers like Parofluor, Parofluor ULTRA, Kalrez, Chemraz, Simriz and Perlast. A single v seal can play an important role in two directions’ seal and is applicable for different seal media such as oil, water, gas, chemical medium and other mixed media.
Darcoid maintains industry leadership by offering innovative, high quality supporting accessories for your high-end machinery. The company has a comprehensive choice when it comes to adhesives and sealants with all different types covered.
The unique needs of your machinery are identified and every minute point of necessity is taken into consideration in order to render the best services for a safe and hassle free functioning of the machinery. This company provides the best accessories for your machinery so as to help you enhance industrial performance efficiency and make necessary changes to increase standards and your machinery’s productivity quotient. They have on offer a range of different variants of gaskets, sealants, adhesives, Parker o rings, O rings, O ring kits and thermal products and more, to pamper and tune up your machinery and it’s efficiency with. The uniqueness of these seals from the house of Darcoid Nor Cal Seals makes the product reliable and sustainable.